Power Key

The research and development department of DPS Solving has developed a new adjustment key, made of highly torsion-resistant steel, which enriches the Tools line.

Power Key is ergonomic, versatile, comfortable to use. It has a high-performance joint without welding, obtained with a single turning during the production phase.

Power Key is a tool designed to record all the adjustable supports of the DPS Solving line and ensures extreme practicality in all requirements of use, both in the center of floors and for use near the wall. Power Key, in fact, consists of two elements: the sliding handle and the flat-cut coupling:

  • The handle, sliding in the bar, can be used both in a symmetrical T position and in an asymmetrical L position – facilitating adjustment even where the movement space for the operator is limited, for example near the wall or at corners.
  • The flat cut graft fits into the handle – to which it is secured by means of an adjustable lateral grain – thus creating a single body.

The two-element configuration offers great ease of use and extreme ease of replacement of the coupling, in case of wear, by simply unscrewing the side grain. In addition, the coupling is compatible and can be used with electric and manual screwdrivers, both for snap couplings and for self-locking conical ones

 

The evolution of KING’s support: new concept, new design

King is the first support in the world for raised floors with a Patented Converter system, designed to switch the base from fixed into self-leveling mode. Today the Converter system presents important technical innovations in its design, aimed at further simplifying the application phases.

The new Converter of King support allows the screw to position itself in a unique way, on the fixed or self-leveling mode, eliminating any uncertainty.

The technical excellence to which DPS Solving solutions always aim has led to the development of a new design of the screw and of the King base, in order to make the positioning and conversion phase between the two modes even more intuitive, simple and immediate.

The new base has a reinforced structure to further improve the bearing capacity of the support, which is already excellent for its category.

Fixed base / self-leveling base.
King pedestals are always supplied in self-leveling mode (B) so that the pins of the base are in correspondence with the wider and clearly distinguishable openings of the screw, allowing the free movement for the self-leveling application.

If needed, to convert King pedestals in fixed mode (A) it is necessary to unlock base and screw from the self-leveling mode position, then combining again the two elements together by simply positioning the pins of the base in correspondence with the appropriate smaller slots in the screw and pushing the two elements until the joint is locked.

 

 

The articulated base allows to compensate the level differences up to 5% of the surface without compensators and keeps the center of gravity of the support always at the center of the base, in favor of a better stability compared to supports with self-leveling head.